Klein Tools - For Professionals Since 1857

Screwdriver Set, 1000V Insulated Slotted and Phillips, 2-Piece


  • Screwdriver Set includes one 1/4'' Cabinet tip (Cat. No. 602-4-INS) and one No. 2 Phillips tip (Cat. No. 603-4-INS)
  • Insulated screwdrivers reduce risk with work up to 1000 volts
  • Durable, two-layer, moulded insulation
  • Orange outer coating is flame and impact resistant; white high-dielectric inner coating is bonded to the steel
  • Made in the USA
  • Cushion-grip handles for greater torque and comfort
  • Meets or exceeds IEC 60900 and ASTM F1505 standards for insulation
  • Made in the USA
  • Includes non-magnetic tips
JPG (High Resolution) 33532-ins_photo.jpg
PNG (Transparent Background) 33532ins.png

The screwdrivers in Klein Tools' 2-Piece Insulated Screwdriver set have two layers of insulation to protect from electric shock. A thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool, while a bright-orange outer coating is flame and impact resistant. Klein insulated tools exceed the IEC 60900 and ASTM F1505 standards for insulated tools, and are clearly marked with the official 1,000-volt rating symbol.

For working close to live electrical circuits
Special Features:
Flame Retardant and Impact Resistant Handle, Tip-Ident® Handle
(2) Screwdrivers
Shank Length:
4'' (10.2 cm)
Induction-Hardened Steel
Handle Material:
High-dielectric plastic
Handle Colour:
Overall Length:
7.25'' (18.4 cm)
Number of Pieces:
IEC 60900 and ASTM F1505
9.6 oz (272 g)
Additional Information
  • Do NOT use to pry or chisel.
  • Only use tools that are marked with the official international 1,000-volt rating symbol shown above, if there is any chance that the tools will make contact with a live electrical source.
  • Whenever possible, always switch off lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with a live source.
  • Do NOT touch uninsulated portion of the tool or any conductive object when either might contact a live electrical source.
  • Wear approved eye protection. Always inspect your tools before use. Do not use if orange coating cracks, breaks or becomes damaged. Destroy tool if white layer shows through orange layer.
  • Because moisture, film and other surface contaminants are conductive, Klein insulated tools must be kept clean, dry and free of any surface contamination.