Cable Tester Kit with Scout™ Pro 3 Tester, Remotes, Adapter and Battery

VDV501-851

  • Cable tester tests voice (RJ11/12), data (RJ45) and video (coax F-connector) terminated cables with clearly defined results
  • Measures cable length of up to 2000' (610 m)
  • Test for open, short, miswired or split-pair faults
  • Backlit LCD screen displays cable length, wiremap, cable ID and test results
  • Trace cables, wire pairs and individual conductor wires with multiple style tone generator (requires analog probe Cat. No. VDV500-123; sold separately)
  • Hub blink mode to identify port location on a hub or a switch
  • LanMap™ and CoaxMap™ Location Remotes (5 each) map and ID multiple cable runs in a single step
  • Includes voltage warning, shield detection, auto power-off, low-battery indicator and a self-storing remote control
  • Auto Power-Off feature to conserve battery life (9V included)
  • Kit includes: Scout™ Pro 3 Tester, (1) self-storing remote, (5) LanMap™ RJ45 locator remotes, (5) CoaxMap™ F-Connector locator remotes, (1) Coax F-Connector, manual and 9V battery
Video
Images
JPG (High Resolution) vdv501851_photo.jpg
PNG (Transparent Background) vdv501851.png

The Scout™ Pro 3 Tester Starter Kit is a versatile cable tester that locates and tests Voice, Data and Video cables. Identify multiple cable runs with the included location mapping remotes. This kit verifies accurate cable installations each time. Backlit display assists in reading results in lower light.

Specifications
Type:
Twisted Pair, DATA, Voice, LAN and Coaxial
Application:
Cable Testing
Special Features:
Measures Cable Length; Backlit LCD; Hub Blink
Cable type:
DATA: Shielded or Unshielded, CAT3, CAT5E, CAT6, CAT6A, CAT7, COAXIAL: RG59, RG6/6Q
Overall Length:
7'' (17.8 cm)
Overall Height:
3'' (7.6 cm)
Overall Width:
1.25'' (3.2 cm)
Material:
Plastic and Metal
Test-n-Map ID Remotes:
(1) Self-Storing
Location ID:
(5) RJ45 Data and (5) F-Coax Connector Locator Remotes
Batteries:
9V Alkaline
Battery Life:
50 Active Hours
Drop Protection:
2 m
Supported Remotes:
18
Connection & Adapter Types:
RJ11, RJ12, RJ45, Coax F
Display:
Back-lit LCD
Multiple-style tone generator:
Yes (5); Requires Tracing Probe (Cat. No. VDV500-123); Sold Separately
Faults detected:
Open, Short, Mis-wire
Testing & Measurement Types:
Ethernet / Data and Coaxial
Included:
Tester, Self-Storing Remote, (5) LanMap RJ45 Locator Remotes, (5) CoaxMap F-Connector Locator Remotes, (1) Coax F-Adapter, Manual, (1) 9V Battery
Standard:
CE
Weight:
1.2 lb (0.5 kg)
UPC:
092644692260
Additional Information
Warnings
  • Read, understand and follow all instructions, cautions and warnings attached to and/or packed with all test and measurement devices before each use.
  • Always wear approved eye protection.
  • Do NOT use on live circuits.