Digital Angle Gauge and Level


  • Digital Angle Gauge and Level can measure or set angles, check relative angles with the zero calibration feature, or can be used as a digital level
  • High visibility reverse contrast display improves visibility in dimly-lit work environments
  • Strong magnetic base to attaches to conduit, pipes, saw blades, vents, ducts and other ferromagnetic surfaces
  • V-groove edges enable optimal alignment on conduits and pipes for bending and alignment
  • 0 to 90-degree and 0 to 180-degree measurement ranges provide easy use in applications such as woodworking, bending conduit, installing electrical panels and working on machinery
  • 0 to 180-degree range is useful when accounting for kickback in pipe bending applications when bending to 90-degrees or more
  • Display auto-rotates when upside-down for easy viewing
  • Water and dust resistant with rating of IP42
  • Soft carrying case and two AAA batteries included
wf_magnetic Product Icon
wf_ce Product Icon
ukca Product Icon

The Klein Tools Digital Angle Gauge and Level can measure or set angles, check relative angles or can be used as a digital level. The strong magnetic base attaches to ferromagnetic surfaces such as conduit. Along with dual measurement ranges of 0 to 90-degrees and 0 to 180-degrees, this tool has a high visibility reverse contrast display for easy viewing.

Digital Level
Measure or Set Angles, Check Relative Angles or Use as a Digital Level
Special Features:
V-grooves Around Entire Perimeter, Dual Measurement Ranges at 0° to 90° and 0° to 180°, Reverse Contrast
ABS Plastic Housing and Electronic Components
Magnet Type:
Permanent Rare Earth
+/- 0.1° from 0° to 1°, 89° to 91°, 179° to 180°; +/- 0.2° at All Other Angles
Drop Protection:
6.6' (2 m)
Ingress protection:
IP42: Water and dust resistant
2 x 1.5 AAA
Digital Angle Gauge and Level; Soft Carrying Case; Instruction Manual; Batteries
Overall Length:
2.36'' (6 cm)
Overall Height:
2.2'' (5.6 cm)
Overall Width:
1.2'' (3 cm)
3.5 oz (99.2 g)
Additional Information
  • Read, understand and follow instructions to ensure safe operation
  • Always wear approved eye protection
  • See instruction manual for additional warnings